OXVA is a relatively new vaping brand that has quickly gained popularity due to its innovative designs and commitment to
quality. OXVA is known for introducing unique features and designs.
What to do if the XLIM Pro doesn't turn on?
- Check the battery, and ensure the device is fully charged.
- Press the fire button five times rapidly and consecutively, this will turn on the device.
- Inspect the device by looking for any visible damage to the charging port or buttons.
- Try a different charging cable, maybe the charging cable being used is faulty.
- If these steps don't resolve the issue, it's possible there's a more serious problem with the device. In this case, if under refunds policy, you may be eligible for refund and return.
What to do if the XLIM device can't becharged?
If your XLIM device isn't charging, try these steps:
- Check the charging cable and port: Ensure there's no damage or debris the charging port. Try a different cable if possible.
- Verify the power source: Use a reliable power outlet.
- Inspect the device for damage: Look for any visible signs of damage to the charging area.
- Try a different charging method.
What to do if the device does not fire?
If your vape device isn't firing, it could be due to several reasons:
- Battery issues: Check if the battery is fully charged or faulty.
- Coil problems: A faulty or improperly installed coil can prevent firing.
- Device settings: Ensure the device is turned on and the wattage is set correctly.
- Button malfunction: A faulty fire button can prevent activation.
- Atomizer connection: Verify that the atomizer (tank or pod) is securely connected.
If these steps don't resolve the issue, it might be necessary to troubleshoot further or contact the device manufacturer
for assistance.
Why my vape device does not showatomizer?
A "no atomizer" error typically
indicates a problem with the connection between your vape mod and the coil.
Here are some common causes:
- Loose or dirty connection of pins:
Ensure the tank is securely screwed onto the mod and both connections are clean. - Faulty coil: A damaged or defective coil might not be recognized by the device.
- Incorrect coil installation: The coil might not be screwed in properly.
- Device malfunction: In rare cases, the mod itself might be experiencing issues.
What to do if auto-draw does not work?
If your vape device's auto-draw function
isn't working, here are some potential solutions:
- Check the airflow: Ensure the airflow is open and not obstructed.
- Clean the pod or tank: Debris or condensation can interfere with the sensor.
- Check the coil: A faulty or improperly installed coil might affect the auto-draw function.
- Battery level: A low battery can sometimes impact device performance.
- Device settings: Ensure the auto-draw function is enabled in the device settings.
- Firmware updates: Check for available firmware updates that might resolve the issue.
How to deal with vape device heating up?
Overheating can be a safety concern, so
it's important to address it promptly. Here are some steps you can take:
- Stop vaping immediately: Allow the device to cool down completely.
- Check battery health: Ensure the battery isn't damaged or swollen.
- Inspect the coil: A burnt or faulty coil can cause overheating.
- Adjust wattage: Lower the wattage to reduce heat generation.
- Clean the device: Remove any debris or residue that might be blocking airflow.
- Avoid chain vaping: Give the device time to rest between vaping sessions.